dj mountain ramps

[rotormech]

so i have a dj kit in my 04 800 summitt,worked good,i used the factory 415 ramps.they are know geting a bit to worn,will i notice a big difference with joes mountain ramps or stick to the 415,s?i whatched all the vids with these kits installed doing 8ft high catwalks mine didnt do that lol...but it was alot better.

 

[DaveB]

You will need to change the pin weight to go to the mountain ramps (lower) as the mountain ramp finishes a lot flatter than the 415. Are you happy with your top speed with the 415? If so, I'd say stay with them. The DJ mountain ramp is profiled very close to a 415 for the bottom 1/3rd, then transitions to finish similar to a 441 ramp.

 

[rotormech]

thanks dave,not to worried about top end,but more mid would be good..

 

[DaveB]

Here's a 441(front) beside a 415....you can see how the 441 (or DJ mountain) will start to push a bit harder through the mid to the top end....might be worth trying. I haven't heard too many people (myself included) who haven't like these ramps.

 

[DaveB]

Here's a DJ prototype, beside a 441, beside a 415....

 

[DRD]

Jesus Dave, you can probably see the pile of clutch parts you've tried from space.