- Thread starter
- #21
sick1
Active VIP Member
Nope wasnt the turbo. Wasn`t anything that I tried.. Pretty much threw 4000.00 to the fire trying to figure it out.. Aero said it had to be my sled itself.. Pulled the kit put sled to stock, ran the crap out of it for a month, proved the sled ran great. Turned out that the wiring harness from aero for the new controller was bad. Obviously not to much care and control goes into the building of the boxes. First controller box was plain and simple bad. How I figured it out was I took the harness to mountain magic and compaired wire to wire and clip to clip against a new one out of the box and low and behold one injector clip had the wires installed dislexic and was shorting out the system. So now 5 months later its finally on and working. Good luck figuring out your problem dont bother calling aero for help they dont know jack sh$t.