Search results

  1. B

    rev 800 hard start when warm

    Glade it was the easy fix. I would like to know how many guys are replacing pistons and rings and the like when all they need is a $5.00 relay
  2. B

    rev 800 hard start when warm

    It's the 1" black cube up by the fuses. Its the same one that when fails open you have no Lights. I had one fail open and one closed.
  3. B

    rev 800 hard start when warm

    Are your carb heaters off? If so try changing the relay. Had this happen, the relay fails closed causing some of the spark to go to the head lights. Makes it a bugger to start.
  4. B

    07 skidoo summit 800R electrics all quit but the engine seems to run ok.

    Ya! been there with the plastic retainer on the coil. I was trying to sort the no power issue that turned out to be the relay. Ski Doo should put a sticker on the coil saying try relay first.
  5. B

    07 skidoo summit 800R electrics all quit but the engine seems to run ok.

    Sounds like the relay. 1 inch black cube. Pull it out and take it to napa or canadian tire. Around $8.00. Buy two and carry a spare.
  6. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    if i go with the 20 pilots. do i set them at 1.5 turns out?
  7. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    Thanks for the input. I set the idle down and adjusted the Pilot screws back to 1 1/2. It is better but upon checking the settings in the manual I noticed the following. On wide open throtle the gate is a little higher than spec. The choke cam is to be 0 to 1/64" from the stop, the closest I can...
  8. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    Ok check and cleaned carbs, they were very clean. Boots are good on carbs and Manifold bolts are tight. Any other ideas?
  9. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    This is a new issue, it did work properly before. If I choke it and don't rev it, the idle will stay down until next time it is reved up.
  10. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    Carb boots look good. I am around Edmonton. Idle screws are out 1 3/4 turns.
  11. B

    07 XRS idle hangs up at 3000k, pull choke and it come down.

    I have a 07 xrs 800r. when the sled is cold everything works fine. When the sled is warm the rpm hangs at about 3000 rpm and sits there. If I put the choke on briefly the rpm will come down to normal. As soon as I rev it up again the same thing happens. Any ideas?
  12. B

    Lets see your REV

    Where did you get the blue tunnel suports at the back. Looks very cool
  13. B

    Broken bolt in chaincase

    I picked up the replacement screw and they have changed from the hex bolt to a SHCS that is also about a 1/4" Longer.
  14. B

    07 Rev won't restart once it's warm

    I had the same issue and it was the relay. Its a five dollor fix. Change it a give it a try. It is a 1" black cube near the fuses. if you don't have a relay unplug the head lights and see if it starts, if it does it's the relay.
  15. B

    My fix for worn out recoil housing!!!!!!!!!!! Never buy one again!!! Hopefully

    Now that's a great thinker. I will save this for sure. thank you
  16. B

    Spy pics or any other credible info on the 2013's

    Obviously you never bought a 07 xrs with the new (at the time) 800r. I am on my 3rd engine. I have bought three first year sleds all of them were disasters for me. I guess some have more luck than others.
  17. B

    06 800 won't shift up under light throtle

    My buddy has a all stock 06 800ho with a 144 track. The sled works real good if he hard on the throtle but if he is just running easy like 40 miles per it revs up and just does not shift up. From what he says it done it from day one. I am more use to cats and the secondary has a adjustment for...
  18. B

    McBride Boundaries Maps

    Me too please thanks in advance. sled99@telus.net
  19. B

    06 crossfire clutch hanging up

    Well everything else looks good to me other than the weights don't move that freely. Any other Cat clutch or comet I have worked on the weights would not require any push at all to move them, they would move freely and drop if you turned the clutch upside down. I was suspecting that the orings...
Top Bottom