Recent content by ski-doo

Got 9000kms on my F-350 dually 285/70r17 toyo cts studded. Really good tire. Went with the ct's over the Duratracs cause I use the truck for oilfield hauling and they have the 3 ply sidewall.

Bought my Trygg chains at Supersling in Nisku

I would do it myself but in order to get the permit it needs to be signed off by a journeyman with their ticket number. Leduc a lot different than the city for getting permits.

I am out in leduc

Looking for a good reliable electrician to wire my detached garage. Power is run from house to garage already just need the garage wired up. If anyone knows of a good electrician please let me know. Thabad in advance

yeah got all the permits

Its a gable roof 4/12 pitch. Pads poured already. Lumber is ready for delivery just need to give them 2 days notice.

Looking for someone to frame a 22x24' detached garage with 9' walls and an 8' overhead door. I just need the garage framed. I can put on the shingles, siding, doors etc. If you know of any good framers or have any contacts please let me know. I am located in Leduc. Thanks in advance.

I replaced all the hemlock rivets I took out with 6mm bolts but there is 2 8mm studs that come through the frame and support right below where the a-arms bolt too. Those are the 2 that I am wondering about. I looked on the parts fiche and you can buy the nuts but not the studs that are attached...

I am replacing the front suspension support on my 09 XP cause I cracked the bracket near the 2 studs at the front of the frame. I got the old one out and am putting the new one in but I need replacement studs that go through the frame and into the support. Talked to doo and they say these studs...

thanks for the info I will give you a shout sometime next week. Any recommendations on brake pads and rotors?

Hey I got a 06 dodge 3500 mega cab and I need to replace the steering stabilizers on it. Just looking for some recommendations on where to buy them and which brands to go with. Not sure if it makes a difference but its got 35's on it with a 4" lift Thanks

yeah amr racing. From what I have read they sound like the most durable wrap out there. Ill head into gateway when I am in town and check it out. Thanks

Just wondering if anyone has ever used an AMR Graphic kit or if they know how well they hold up.

you get them off the powercommander website. I dont believe they have any maps available for your model. Clean Fire Injection Models&pc-ver=411