I am replacing the front suspension support on my 09 XP cause I cracked the bracket near the 2 studs at the front of the frame. I got the old one out and am putting the new one in but I need replacement studs that go through the frame and into the support. Talked to doo and they say these studs only come with the frame. Anyone run into this problem? should I just run an 8mm hex flanged through each hole? Any advice/help would be great. Thanks
09 Summit Front suspension support help
- Thread starter ski-doo
- Start date
Jake jenkins
Active VIP Member
I put grade 8 , 1/4 bolts in mine got from nut and bolt supply cheap . Brp wanted 3 bucks each
- Thread starter
- #3
I replaced all the hemlock rivets I took out with 6mm bolts but there is 2 8mm studs that come through the frame and support right below where the a-arms bolt too. Those are the 2 that I am wondering about. I looked on the parts fiche and you can buy the nuts but not the studs that are attached to the frame.
