R_janssen
Active member
Bent the lower a-arm on my sled a couple weekends ago and after changing it, the one ski (left if it matters) sits back about 3/4" still. This is just eyeballing it. Can't see any damage on the aluminum bracket so I'm wondering if the upper
a-arm could tweaked? I did a degree check on another sled and compared to mine. The spindle is out about 5 degrees as compared with the other side. Right side sits about 15 degrees holding an angle finder on spindle and left is about 10 degrees. Am I correct on the upper a-arm or could it be something else?
a-arm could tweaked? I did a degree check on another sled and compared to mine. The spindle is out about 5 degrees as compared with the other side. Right side sits about 15 degrees holding an angle finder on spindle and left is about 10 degrees. Am I correct on the upper a-arm or could it be something else?