Nov 17, 2012 #1 jimjim Active member Joined Nov 6, 2008 Messages 28 Reaction score 8 Location Fort mac does any one no what the volts for my tps is for the closed and idle Position is it the same as the 08s .70=+/- .01 for closed and idle is .93+/-.01
does any one no what the volts for my tps is for the closed and idle Position is it the same as the 08s .70=+/- .01 for closed and idle is .93+/-.01
Nov 17, 2012 #2 Rhodesie Active VIP Member Joined Mar 11, 2010 Messages 2,077 Reaction score 6,898 Location Medicine Hat, AB jimjim said: does any one no what the volts for my tps is for the closed and idle Position is it the same as the 08s .70=+/- .01 for closed and idle is .93+/-.01 Click to expand... 8,9,10 all same. try to get the idle @.937 or .942 volts.
jimjim said: does any one no what the volts for my tps is for the closed and idle Position is it the same as the 08s .70=+/- .01 for closed and idle is .93+/-.01 Click to expand... 8,9,10 all same. try to get the idle @.937 or .942 volts.
Nov 18, 2012 Thread starter #3 jimjim Active member Joined Nov 6, 2008 Messages 28 Reaction score 8 Location Fort mac Ok I did the .70 at closed but when I set the idle at .93 and start it it idles at 2400 even after it warms up
Ok I did the .70 at closed but when I set the idle at .93 and start it it idles at 2400 even after it warms up
Nov 18, 2012 #4 Rhodesie Active VIP Member Joined Mar 11, 2010 Messages 2,077 Reaction score 6,898 Location Medicine Hat, AB when you set it you had the cable unhooked from the flipper? if so it sounds like its sucking air in some where. pto crank seal? spray ether in short bursts around the seal and see if the rpm changes.
when you set it you had the cable unhooked from the flipper? if so it sounds like its sucking air in some where. pto crank seal? spray ether in short bursts around the seal and see if the rpm changes.
Nov 19, 2012 Thread starter #5 jimjim Active member Joined Nov 6, 2008 Messages 28 Reaction score 8 Location Fort mac ya i did have the cable off ok ill go get some ether and give it a spray thx for all the help