Question on 8fs-00 weights

[lightening1000]

I have a couple of sets of 8FS-00 yamaha weights and a bbv51 helix, question is I would like to know if these weights would work in a turbo viper with the boost it turbo at 10 lbs. also what angle of helix is that?? That number on there means **** to me,, lol I run now is blue/brown/blue primary spring, dalton weights, 47* helix with purple epi secondary spring a 3-0. As boost it recommends. I feel the dalton weights are too weak in the mid range and the sled feels a bit flat to me. I ran these weights in my turbo nytro, a few years ago at 74.5g..I don't remember how they worked, someone must of ran these before with feedback. Thanks. D

 

[06yamahaapex]

The bbv51 is a 45deg. What Dalton weight is in your viper?

 

[lightening1000]

The bbv51 is a 45deg. What Dalton weight is in your viper?

The adjustable ones with set screws

 

[06yamahaapex]

There are 3 different base weight adjustable weights.

 

[lightening1000]

There are 3 different base weight adjustable weights.

Dtya-2

 

[lightening1000]

Are you familiar with the weights I am asking about?

 

[06yamahaapex]

yes the profile of a 8fs-00 and dtya 2 are pretty close. So should act close to the same in the sled. PM'd you.

 

[Aceman]

8FS weights came stock in my 14 mtx, added 180 mpi kit, loaded all 3 holes in weights 78g, 14.5 rollers, banging the rev limiter. 5-6 psi. Swapped to 8FP loaded, 82g, still hitting rev limiter but not as bad. Still tuning