Primary Clutch Torque Specs

[Wilk INStheWEST]

I have a 2012 Pro 800, and I just changed out the weights in my primary to the MDS adjustable weights. Putting everything back together, and I realize I don't have the torque specs for the primary cap bolts (6 of them) and the main primary spring bolt. Does anyone know what they should be torqued back down to?
Thanks in advance.

 

[ditch1000]

Clutch cover bolts are 8 ft lbs. I'm not sure about the main bolt; usually they are in the 45-65 ft lb range.

 

[dragonweld28]

The main bolt is torqued to 80 ft lb

 

[rmscustom]

Clean crank and clutch with brake cleaner, torque to 80 ft lb, run and engage a few times, retorque and repeat until it doesn't take anymore torque. Clutch will come off nice and easy the next time you need it to following these steps.