Need new xp 800 or rebuilt

Big Jay

Active VIP Member
Joined
Apr 13, 2008
Messages
187
Reaction score
52
Location
red deer
Where's best place to buy a new short block or get my engine rebuilt fast for a 2009 xp 800
Text or call me 403 505 5757 if some one on here has an engine or rebuilds them.
I can get new short block for 2000 with exchange for mine.


Sent from my iPhone using
 

pistonbroke800

Active VIP Member
Joined
Sep 1, 2009
Messages
933
Reaction score
835
Location
Airdrie
You could do an 860 kit for about the same money and you would get a fresh top end with more power than a stock engine
 

milton

Active VIP Member
Joined
Oct 14, 2008
Messages
527
Reaction score
405
Location
coaldale
Artic edge in Crowsnest pass. Brent did mine, 860 big bore. I did a lot of research before getting it rebuilt and he had the best rep. Good luck.
 

scott 259

Member
Joined
Dec 3, 2012
Messages
15
Reaction score
8
Location
St Albert
Where's best place to buy a new short block or get my engine rebuilt fast for a 2009 xp 800
Text or call me 403 505 5757 if some one on here has an engine or rebuilds them.
I can get new short block for 2000 with exchange for mine.


Sent from my iPhone using

Mot's Maching Edm.
 

bayman

Active VIP Member
Joined
Nov 11, 2008
Messages
913
Reaction score
725
Location
Calgary
I put an 860 a couple of years ago...Terra Alps, good product, but took a looong time. Gave it to him in June, got it back in October. Mine cost a little more, but I had to put a case and crankshaft in as well. If I was to do it again, I would go with a Linderman set up. He did a little clutching,fixed an oil leak(my issue, not Ted's) and did his rave mod. Awesome guy to deal with, ANSWERS phone calls or calls you back, and is a magician when it comes to motors.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
One guy is all you need to know Deano!! He is the owner of Mad Motorsports in Leduc. He's a site vender so do a search for his number.
 

mxz sledhead

Active VIP Member
Joined
Jan 26, 2009
Messages
962
Reaction score
113
Location
Stony Plain
What do you need top end the whole crate engine i just did my own took about 10hrs xp are a pain to do cost about 16-1700$ for the top end plus new pull start, oil pump, throttle cable,and woosiers pistons
 
Top Bottom