M1000 losing mag side after quarter throttle..

Joined
Sep 22, 2010
Messages
14
Reaction score
0
Location
prince george
Sled starts and idles great but past quarter
Throttle sled runs on one cylinder. Plugs on mag side are wet and pto side is dark brown.. Broken reed? Anyone experience this?Sled had an attitude fuel controller, unplugged it and the sled
Livened up for a
Second and then
Started back on the one cylinder. My fuel pressure is 45, I haven't found any broken wires yet..
 

mattsterz

Active member
Joined
Jan 3, 2010
Messages
34
Reaction score
4
Location
prince george,b.c.
i just had an issue with a short from rubbing mark on one of the plug wires and it ran good untill put under load then it would bog and not rev above 6100-6200.may not be your problem but worth ruling out.
 

glengine

Active VIP Member
Joined
Jan 1, 2008
Messages
3,724
Reaction score
1,160
Location
Smithers, B.C.
The firs tthing that i'd do is unplug the main plug going to the handlebars to rule out anything in the bars as i've had lots of issues with wiring in the bar switches. Cause it sounds like yours is doin exact same as mine used to do and mine was a super easy simple fix.
 
Top Bottom