850 TuRBoo siZe in ComBinaTioN / psi HP housing @8000,9000,10,000,11,000 FeeT of ALT

[o zone guy]

mr maxXxWeLL when u have a chance Please load the info about 850 turboo size in combination / psi HP housing for 8,9,10,11 thousand feet of elevation .. thanks mr maxXxweLL please post each on separate post/thread and can u also post the HP numbers page also... fortunately mr maxXxWeLL is out testing the latest and greatest the the sled world has to offer .... he will be backKKKK !! beeP !! beeP !! so RKNiGHT111 will post shortly .... o wow !! that was quick RKNiGHT111 ... wooT !! wooT !!

 

[rknight111]

 

[o zone guy]

//uploads.tapatalk-cdn.com/20210319/6706428101622d179a79afb5e635d4c0.jpg
//uploads.tapatalk-cdn.com/20210319/2a159d54bb98b0a4507cc108b221973d.jpg
//uploads.tapatalk-cdn.com/20210319/2f4348310879837bfb9fa9e6361388a8.jpg
//uploads.tapatalk-cdn.com/20210319/0aeed6f194c32cd6e6958aed12a2891e.jpg

thank you so much rKnight ... hope this helps

 

[o zone guy]

thank you so much rKnight ... hope this helps

hello if the info is a little blurry ... sent ozone a text and he will send u a copy thats more clear to see and also ozone can send the hp numbers from the DyNO this is also important info so heres ozones number 403-863-1577 ozone will replie thanks

 

[o zone guy]

hello if the info is a little blurry ... sent ozone a text and he will send u a copy thats more clear to see and also ozone can send the hp numbers from the DyNO this is also important info so heres ozones number 403-863-1577 ozone will replay thanks

when looking at the charts to find the right turboo / housing keep in mind BRP set the bar wit the 7/4 turboo/psi housing at 1.75 ..... 7divided 4 = 1.75 ..... kool need more info contact ozone 403-863=1577 thanks... side note volumetric efficiency must be present for the turboo /psi to work in harmony ... please goggle volumetric efficiency for more detailed explanation .... this is good stuff ... a bigger turboo with smaller psi housing with a ratio of 1.75 seems best for efficiency and 0-2% lag .. probably less then 1% but thats what i was told ... hope this helPs... kooLLL !!!

 

[o zone guy]

when looking at the charts to find the right turboo / housing keep in mind BRP set the bar wit the 7/4 turboo/psi housing at 1.75 ..... 7divided 4 = 1.75 ..... kool need more info contact ozone 403-863=1577 thanks

also when u select a turbo /psi housing combination and your short on WARRANTY HP 165 in the cases above all u have to Dooo is add a straight pipe or tune pipe which make between 7 and 12.5 HP ... i believe it is recommended that a after markeT pipe is needed for the motor to run with maxXxium efficiency .... just my opinion ... kool

 

[o zone guy]

also when u select a turbo /psi housing combination and your short on WARRANTY HP 165 in the cases above all u have to foo is add a straight pipe or tune pipe which make between 7 and 12.5 HP ... i believe it is recommended that a after markeT pipe is needed for the motor to run with maxXxium efficiency .... just my opinion ... kool

another way of adding HP to make up for the WARRANTY HP Losses would be after market reeds either add or single use 2- 4.5HP

 

[o zone guy]

another way of adding HP to make up for the WARRANTY HP Losses would be after market reeds either add or single use 2- 4.5HP

if anybody has any questions or is not sure on how i arrived at any of the numbers ask me and i will answer .... for stock and beyond 165HP or text ozone at 403-863-1577

 

[o zone guy]

311 vieWs

if anybody has any questions or is not sure on how i arrived at any of the numbers ask me and i will answer .... for stock and beyond 165HP or text ozone at 403-863-1577

another idea if u can't quite see the number sin the above pictures... take a pic with your phone and then expand the pic for better visual clarity... hope this helps

 

[o zone guy]

i can also doo the combinations for turbo size/psi housing for the 900,950,1000 motors at elevations of 8000,9000,10,000 and 11,000 ft of elevation ... respectively .. RKNIGHT111 and maxXxWeLL should i post this info for rest of the snow in mudders .... ??????

 

[o zone guy]

another way of adding HP to make up for the WARRANTY HP Losses would be after market reeds either add or single use 2- 4.5HP

i wonder how much HP a tuned CaN comin off a tuned pipe would add another 3- 6 HP maybe . hmmm anybody ???

 

[o zone guy]

OTT,ott ,oTT , Ott

 

[o zone guy]

hello rKNiGHT can u post the pic of the HP number onto this PoST /THreaD thanks aLaTTE ... when u have a chance .. KooLBeaNS

 

[Teth-Air]

Would you be better off adding more boost or dropping 50 lbs off the chassis? Asking for a friend.

 

[o zone guy]

Would you be better off adding more boost or dropping 50 lbs off the chassis? Asking for a friend.

wait till warranty runs out untiL then peas and KaRRoTs lol .. heY stud update your ad or make a second 1 about cordless tether info ,price etc ... post wit snowandmud.com wonder what the ad slick would cost to build and how much per month ... rKNiGHT may be able to helpPpP !!! asking for a friend ,, lol

 

[Teth-Air]

wait till warranty runs out untiL then peas and KaRRoTs lol .. heY stud update your ad or make a second 1 about cordless tether info ,price etc ... post wit snowandmud.com wonder what the ad slick would cost to build and how much per month ... rKNiGHT may be able to helpPpP !!! asking for a friend ,, lol

http://www.sourceinnovations.ca/product/phantom-teth-air/

 

[o zone guy]

http://www.sourceinnovations.ca/product/phantom-teth-air/

copy the o zone concept make your logo look more corporate .... take real good look at the .. The o ZoNE sticker .. see precision LabeL in calgary or kelowna they can help wit redesign of logo and colour combination ...make some LabeLs use max of 3 colour to keep price down... side note Bruce BuMsTead is the owner and well known sLedder ... luVs to help sledders ...tell m u know o ZoNE dave... precision LabeL 403-203-1420... 1-800-579-0730 hope this helps .. googLE : precision LabeL for offices , numbers and info in calgary and kelowna . there rates to redesign and make templates and pricing is top of class .. very reasonable .. great people... side note find a spot to put TiNY ( smaLL ) canadian flag ... we are canadian