2007 Phazer electrical issues

Blueberry6

Member
Joined
Jan 16, 2014
Messages
8
Reaction score
0
Location
Spirit River
Anyone with a Phazer, this may help.... Had a couple codes come up that i could not figure out even troubleshooting everything from the manual and ended up finding this wiring harness with ground wires behind the rad with a few melted wires. It was wrapped very neat from factory, but started to melt...
This may help someone at some point.
 

Attachments

  • image.jpg
    image.jpg
    144 KB · Views: 156

DABOMB

Member
Joined
Oct 12, 2009
Messages
8
Reaction score
0
Location
Saskatchewan
Huh! I will have to check mine Was out pullin the kids around the other day and could smell hot plastic. Now I have code 81 for my grip warmers coming on and off periodically and I know that the gips arent burnt out. Also had to piss around to get it to start once and it seemed like it was a poor ground issue. Thanks I will look for that wire.
 

Culvert

Active VIP Member
Joined
Jan 4, 2007
Messages
1,040
Reaction score
251
Location
Cold Lake, Alberta
There was a reacll on that item aswell. You can take to a dealer & see if it still apllies to your sled.
If not I believe that fuse block is a $5-$10 item.
 

Cubby

Member
Joined
Feb 20, 2010
Messages
17
Reaction score
23
Location
Manitoba
The recall is S2009-008 Ground Failure at Joint Connector. If you shoot me your email I will send you the complete document (4 MB PDF).
 
Top Bottom