nytro build is done !!

willlbilly

Member
Joined
Jul 17, 2010
Messages
7
Reaction score
2
Location
mountain home ,id
time to start on the next one.
 

Attachments

  • 100_3451.jpg
    100_3451.jpg
    109.8 KB · Views: 204
  • 100_3450.jpg
    100_3450.jpg
    106.3 KB · Views: 193
  • 100_3446.jpg
    100_3446.jpg
    113.1 KB · Views: 207

willlbilly

Member
Joined
Jul 17, 2010
Messages
7
Reaction score
2
Location
mountain home ,id
nice one......... could you list the mods......

front cooler removed to make way for avid 8 tooth drivers
ve tunnel
all the polish a could stand to do
2871 BD race kit
CE163/2.5 /3.0
e-z ride
home made seat stand
all coolant hoses are silacone not black rubber
all wirring harrness were covered in heat shield at 10 bucks a foot :mad:
stock fan was rewired to come as soon as the engine starts to move air across the aftercooler and push over the turbo and out the vents
all high pressure fuel and oil lines are stainless steel wrapped teflon
piston and rods
custom paint
2cool vents
custom paint on chain case and oil tank
i relocated the oil tank some so i could use a larger turbo drain
steering post from a nytro fx with fly risers
the thing that i spent the most time on is making sure that this could be called a turn key sled no rubbing hoses or wires ect. i spent alot of time on fit and finish
iam still looking for a front end and a set of front shocks
 

willlbilly

Member
Joined
Jul 17, 2010
Messages
7
Reaction score
2
Location
mountain home ,id
do u build sleds for people or just for your self
yes i do build for people but it does take me awhile on somethng like this becasue i will not push a sled out of the door just to get it done .it must be right no problems or i dont want my name on it . i dont do it for a living so i can take extra time to make it look right no rubbing wires , ect. they are a blast to ride but if you are broke on the hill because a wire got to close to heat that to me unacceptable
 
Top Bottom