Jan 27, 2010 #1 K kimluck Member Joined Aug 27, 2009 Messages 12 Reaction score 0 Location edmonton does anyone have the valve clearance spec for intake and exhaust?
Jan 27, 2010 #2 C crisscross1 Active VIP Member Joined Dec 19, 2009 Messages 329 Reaction score 20 Location calgary on my 700 king intake is 0.10-0.20mm (0.004-0.008in) exhaust is 0.20-0.30mm (0.008-0.012in) these measurements are cold clearances hope this helps, good luck
on my 700 king intake is 0.10-0.20mm (0.004-0.008in) exhaust is 0.20-0.30mm (0.008-0.012in) these measurements are cold clearances hope this helps, good luck
Jan 27, 2010 #3 C crisscross1 Active VIP Member Joined Dec 19, 2009 Messages 329 Reaction score 20 Location calgary at this site you can down load the manual for 2 weeks if this helps. my king probably wont be the same clearances sorry
at this site you can down load the manual for 2 weeks if this helps. my king probably wont be the same clearances sorry
Jan 28, 2010 Thread starter #4 K kimluck Member Joined Aug 27, 2009 Messages 12 Reaction score 0 Location edmonton thanks for the specs.