upgrade to 174

amazed

Member
Joined
Nov 11, 2010
Messages
9
Reaction score
2
Location
Calgary
I.m looking at putting a 174 onto my 09 163x. Just wondering if people are using 7 or 8 tooth drivers and what gearing (stock)?????
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,262
Location
Grande Prairie
You can run 8 with the 2.5 but tight. I have ran them for two years with no problems on a 2.5. 20/49 OR 20/51 gearing and would go with the 20/51 (2.55) as this seems to work good. I went to belt drive with (2.52) as i kept breaking chains when i went to the 174.
After you extend tunnel keep snow flap as long as possible for cooling as i cut mine first and had to put the longer flap back on .
 

FranktheTank

Active VIP Member
Joined
Dec 26, 2008
Messages
624
Reaction score
1,230
Location
Regina/Bc
x2 on the syncrodrive I am also planning to do the 174 but with a 3`` track and the drop and roll, the syncrodive is easy to work with the drop and roll just a longer belt and a new cover.
 
Top Bottom