Speedo issue"

[Wingwalker]

Went out today for a ride in the fields everything was ok till my speedo started reading 0
Cycled the display through all the modes everything else was working good ran for about 10 mins with no reading then the speedo started to work again it displayed the speed for about 20 sec's then went back to 0
the only other thing it displayed was it alternated between 1& 2 for a bit then went back to 0

Anyone have any ideas what might be causing this?


'

 

[Danbot]

Check the free stuff first, sometimes too much grease can mess with the speed pickup. Take the speedo cap off the driveshaft, clean it all out and inspect.
My second suspect would be poor connection at the hood hinge. Unplug, them, clean as best you can, and look for loose or corroded pins.
Wiring wiring wiring with these modern Polaris sleds... ugh.

 

[torszula]

I had a similar issue and it turned out to be the speed sensor. Replaced it for about $50.