Small sled truck input ?

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
In efforts pay cash for the 2013 XM, I've decided to sell my 2500hd and deck and buy a el cheapo small truck to haul my new XM on.

I only use my truck to haul the sled and my trials bike anyway and the only reason i've had a full size / deck is because my buddy doesn't have a truck.. well I guess it's time he buys a truck if he wants to keep sledding lol

My budget is $3500 and been looking at S10, S10 ZR2, ranger, older tacoma, Dakota, nissan pickup maybe ?

Probably going to build a ghetto deck as I don't think any of these smaller trucks have enough width between wheel wells to fit a sled in. might even take the bed off and build a flat deck

Any input or suggestion is welcome.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,914
Reaction score
42,096
Location
Sherwood Park, Alberta, Canada
stay away from the ranger. we hav a whole fleet they are brutal. gutless, use alot of fuel. usually dont make it past 200,000km

just had one yesterday seize an oil pump and take out the engine. that was awesome....
 

underdog

Active VIP Member
Joined
Jan 11, 2010
Messages
21,563
Reaction score
7,174
Location
Carbon AB
Find a Dakota with a 4.7 in it. Awesome little engines. I'm selling mine, but that's only to go to a same truck, with less km, and a manual transmission.
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
good deals out "east"

that tundra would probably be 2x as much in BC .. but still not worth a drive back from Edmonton, though I could stop for some waterslide action at west ed, that might make the trip worth while ;)
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
lol

5L35Kf5H73E33Ka3H3c6g7878c5b943871921.jpg

94.5 7.3 powerstroke, custom flat deck fits 2 sleds, 5 speed manual. and it fits the budget!! doesn't fit the "small truck" criteria I started out with though .. but might just do the trick !
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
There's this old taco, v6 5 spd, tilting flat deck .. little more than the powerstroke and only hauls one sled, but it doesn't look as redneck !!! lol

5Gb5W05J23Ff3N33Hfc6o86ba6d3e25261022.jpg
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
There's this old taco, v6 5 spd, tilting flat deck .. little more than the powerstroke and only hauls one sled, but it doesn't look as redneck !!! lol

View attachment 132524

Its just missing the rebel flag!

I would also look for a taco. Easy to get parts for, easy to wrench on. Tough to find one that hasn't been beet though.

Spend a little more $4500 and find a clean GM/Chev C/K 1500 with moderate miles.
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
as it turns out that toyota pick up has a solid axel swap and is in pretty good shape .. gonna go see it tomorrow, might end up bringing it home with me

only problem is, it will surely turn into another "toy" rather than a vehicle (no pun intended)
 

Hillclimber

Active VIP Member
Joined
Sep 28, 2007
Messages
1,442
Reaction score
271
Location
Penticton B.C
good luck with the search the toyotas love a snowy fsr road and always fun to have many toys right.
 

JaySimon

Active VIP Member
Joined
Mar 13, 2009
Messages
2,396
Reaction score
2,102
Location
Kimberley BC
as it turns out that toyota pick up has a solid axel swap and is in pretty good shape .. gonna go see it tomorrow, might end up bringing it home with me

only problem is, it will surely turn into another "toy" rather than a vehicle (no pun intended)

That's the one!

Next up, locking both diffs, 37's and a twin stick :D:D:D:D
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
Well there it is .. rode the bike out there, looked it over, no rust anywhere, drove fine, everything worked (incl the AC!!) clean inside and out, paid the nice man, loaded up the bike and drove home :D

just have to get that bike out of there and test fit the sled.. it's a tilt deck so I'm trying to figure out if I want to use a ramp, or extend the deck, tilt it and drive the sled right on there..

image (3).jpg
image (2).jpg
 
Last edited:

d mills

Active VIP Member
Joined
Nov 10, 2009
Messages
3,275
Reaction score
4,982
Location
camrose
cool man.....would be sweet if it works out just using the tilt
 

SidewaysInto3rd

Active VIP Member
Joined
Dec 30, 2009
Messages
1,357
Reaction score
2,627
Location
Sḵwxwú7mesh, BC
haha .. the crazy thing is, the payload on this little sucker is 1400 lbs, since I don't need a deck, I can technically get away with 2 sleds and my skinny buddy in there :D

not that i'd ever do anything that crazy !
 
Last edited:

van isle

Active member
Joined
Apr 29, 2008
Messages
144
Reaction score
34
Location
edmonton
haha .. the crazy thing is, the payload on this little sucker is 1400 lbs, since I don't need a deck, I can technically get away with 2 sleds and my skinny buddy in there :D

not that i'd ever do anything that crazy !

I'm surprised it doesnt have a higher payload cap. My 95 T100 cap was almost 2200 lbs because its curb weight was only 3800lbs.
 
Top Bottom