Slim waterproof tunnel bag problem....

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
Has anyone sourced the right side plastic bracket that has the Linq T handle on it? I have busted my bag up pretty good and these pieces arent available.... Im either going to cut up a Linq mount from a jerry can or get someone to 3D print me one properly...
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
4EFC9CE2-4235-4A50-9BF0-A824C3E56A6B.jpeg
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
Black part says 511001137 on it. But they don’t make it?
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
Another Hail Mary from Martins Motorsports South... Lets hope this is a touchdown!

they were able to do a breakdown and found a part number 1 digit off that looks correct

511001136 looks to be a winner, see in a couple days....
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,302
Location
In Heaven & Revelstoke

Part 100f ? In above link.
wow, shows 35.99 EA americian,,,,,,
Not cheap but better than a garbage bag,,,,,

Good luck.
Let us know if you get them and if they work please...
 

Team Pigeon

Active VIP Member
Joined
Oct 31, 2007
Messages
265
Reaction score
362
Location
Pass Creek.
Another Hail Mary from Martins Motorsports South... Lets hope this is a touchdown!

they were able to do a breakdown and found a part number 1 digit off that looks correct

511001136 looks to be a winner, see in a couple days....



hey you got an update on the 1136 part (vs 1137 stamped), I got the same problem with my quick connect.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
the bag is repaired and functional.

I did buy the bracket to make it work in the front 2 positions but I haven't tried to install that yet.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
You’ve lit a fire under my ass to get the thing to fit positions 1 & 2… next weeks project
 

Team Pigeon

Active VIP Member
Joined
Oct 31, 2007
Messages
265
Reaction score
362
Location
Pass Creek.
You’ve lit a fire under my ass to get the thing to fit positions 1 & 2… next weeks project

I commented on another string- you can put the wedge type bag on a 165 expert tunnel WITH either size jerry cans BUT you have to offset the rear mounts on the bag into the other pre drilled holes in the bottom of the bag. But your bag is stuck in the rear position until you don't need extra fuel anymore come late winter where full isn't the scene all day long chewing fuel.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
I have the first gen of the bag from early 2019 made to fit position 2&3 only, I'm pretty sure there's no pre drilled or marked anything to make it fit position 1&2 inside mine. They make a metal bracket to relocate it, that came out in 2020. I have that bracket but need to install it and move forward. new sled got a new bag and this went to the back burner....

 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,547
Reaction score
20,126
Location
Salmon Arm

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,042
Reaction score
11,883
Location
Edmonton
511001136 will get you fixed up. I noticed in another thread Dave mentions that if you use the aluminum ones, they'll build up ice.
 

Team Pigeon

Active VIP Member
Joined
Oct 31, 2007
Messages
265
Reaction score
362
Location
Pass Creek.
511001136 will get you fixed up. I noticed in another thread Dave mentions that if you use the aluminum ones, they'll build up ice.

Sooooo I ordered 511001136 the other day and the package that arrived was marked 36 but the part inside was… 37. Go figure lol.
Now to figure out the left side numbers.


Sent from my iPhone using Tapatalk
 
Top Bottom