Ski Covers

[Superford]

When we were in Valemount last year, we met a guy who had covers that fit over the skiis, kinda like oversized skins, to protect his trailer floor from the carbides. Does anyone know where I could get a few sets?

 

[Murminator]

My friend bought a pair at the snow show a couple years ago BUT they don't fit over mountain skis just the narrower MXZ ski .....saves the driveway and garage floor

 

[Summitric]

Think i remember seeing those in the royal distributing on-line catalogue.... They are like oversize ski skins with a little strap to hold them on snug!!!

 

[Superford]

Thanks a bunch. I will check there.

 

[Superford]

The ones we saw were used with powderhounds so they should be safe on my dragons gripper skiis.

Thanks a bunch.

 

[rknight111]

BUT they don't fit over mountain skis just the narrower MXZ ski

So I would presume they wont fit over my new Gen2 Simmons ski's :d

And the armorguard in my sled trailer has held up so far two three years of carbides with hardly a scratch.

 

[TABSTER]

If you want to buy them in Edmonton go to Cycleworks on 75th street and Roper road. They are around $100.00. There is two styles, wide mountain and narrow ski patterns.

I made a rough set out of 1/4" poly sheeting with a heat gun. Used a couple pieces of alum. angle, drilled a hole in front and behind the spindle in the angle, and slipped a bolt in the front hole and a pin in the back hole. It was about $35.00 in material and about a 6 pack as timeline of the fabrication.....