Rev track change

[HiLlClImB911]

Thinking of changing out the track on my 07 summit 151, thinking of going with 2.25 or 2.5 lug, might even go to a 159 for length, Just wondering if the sled can swing the 2.5 or do you have to drop and roll for clearance issues, going to add drop bracketts when i change out the track, thanks.

 

[maxwell]

you can run the 2.5" camo extreme no problems but i reccomend the avid 7 tooth drivers for clearance and quality.

ALMOST enough clearance for the 3" with the 7 tooth drivers.

i run a camo 2.5 174 on my 2004 rev

 

[HiLlClImB911]

you can run the 2.5" camo extreme no problems but i reccomend the avid 7 tooth drivers for clearance and quality.

ALMOST enough clearance for the 3" with the 7 tooth drivers.

i run a camo 2.5 174 on my 2004 rev

Thanks for the info

 

[maxwell]

you probly want to run the stock drivers though? that im not sure except you will need the 2.86 camo extreme which only comes in 15 wide...

 

[summit1974]

i went from a 151 too a 159 and i have a big wheel kit but still needed railextentions...if you have the money go with the 156 2.5 ,3pich track.You will need to by new drivers but a big wheel kit will pick up the slack of the longer track without needing rail extentions,phone specialty sled in edmonton they will give you some good advice on what you can doo.

 

[CUSO]

Whatever you do, do NOT get the WAHL drivers, unless you like to replace them with Avids.

3" would be tough with a stock chaincase. It's pretty tight.

If you go with a 2.5, you have to get the smallest upper idlers to prevent rubbing.

 

[summ-it-up]

you can run the 2.5" camo extreme no problems but i reccomend the avid 7 tooth drivers for clearance and quality.

what kind of cost is a person looking at for the track and drivers?

 

[maxwell]

what length of track?

drivers are 280$

like CUSO said stay away from WAHL the ones i took off this rev were virtually destroyed.

 

[summit1974]

last time a checked avide drivers 400. 156/16/2.5 track 3pich 800 bucks..big wheel kit 300....youll need to take your drive shaft in to get the drivers put on ..or you could fined a used powder max track for 400-600.A brand new one from skidoo is 1200.00.I found a 159 and bought rail extensions.hope that helps you out

 

[summ-it-up]

what length of track?

drivers are 280$

.

i'm not sure, a few guys i talked to were really happy with their camo plast extreme, they didn't change the lenght tho, just stayed at 151 i believe.

 

[summit1974]

well just keep it the same then:d

 

[OVERKILL 19]

Does a 159 camo Xtream weigh the same as a 159 stock summit powdermax?

 

[summit1974]

iit would be heaver,but it will work better so who cares

 

[Dino]

155 X 2.5 X 16 With Avid eight tooth 2.86 drivers on my 06 Rev. Putting it together this week. Dino

 

[spitfire340]

155 X 2.5 X 16 With Avid eight tooth 2.86 drivers on my 06 Rev. Putting it together this week. Dino

What Dino said, Just get the 2.86 8t drivers lots of clearance, plus the same size as the 2.52 9t so no speedo changes needed, and run alot smoother running that the 7t 3". They have been making the 2.86 2.5" 16W for a few years now.