Rebuilding top-end,06-RMK 600,advice needed

[crowsfeet]

Does anyone know of a good place for parts and what parts do I need? Figure I will need 2 pistons, rings, and a gasket. Never done this job before but I'm sure I can handle it. Also is the head torquing procedure the same as an 800? Any advice would be appreciated, thx

 

[aceofspades9963]

everything you need should be in here http://www.snowtravelers.org/download/SledManuals/Polaris_IQ_Service_Manual_2007_08_PN_9921044.pdf

 

[fnDan]

Get the full top end gasket kit. You might was well pull the exhaust valves and clean them up. Check your bellows too. You may need a new set.