Nov 20, 2013 #1 M Marcel L Member Joined Nov 20, 2013 Messages 10 Reaction score 0 Location shetrwood park alta every 300 kms on sled bellows will fill with oil,whats the problem ?
Nov 20, 2013 #2 snopro Active VIP Member Joined Mar 3, 2009 Messages 102,718 Reaction score 92,764 Location Milo,Alberta Check you roil pump setting and betting the raves need a good clean.
Nov 20, 2013 #3 slededjr Active VIP Member Joined Nov 25, 2011 Messages 1,577 Reaction score 1,972 Location sherwood park Oring or seal (depending on what your model is) could need replacing.
Nov 21, 2013 Thread starter #4 M Marcel L Member Joined Nov 20, 2013 Messages 10 Reaction score 0 Location shetrwood park alta yup I will look at the oilpump adjustment,raves are spotless, just oil in bellows thx for info
Nov 21, 2013 Thread starter #5 M Marcel L Member Joined Nov 20, 2013 Messages 10 Reaction score 0 Location shetrwood park alta got the orings and gaskets,orings looked a bit hard
Nov 21, 2013 #6 slededjr Active VIP Member Joined Nov 25, 2011 Messages 1,577 Reaction score 1,972 Location sherwood park Hard o rings should be the culprit.
Dec 12, 2013 Thread starter #7 M Marcel L Member Joined Nov 20, 2013 Messages 10 Reaction score 0 Location shetrwood park alta I fixed the bellows problem , oil pump was hanging up dumping tons of oil...I put a lite sping on oil pump arm...it works good
I fixed the bellows problem , oil pump was hanging up dumping tons of oil...I put a lite sping on oil pump arm...it works good
Dec 12, 2013 #8 slededjr Active VIP Member Joined Nov 25, 2011 Messages 1,577 Reaction score 1,972 Location sherwood park Did you check cable really good? Usually culprit for pump hanging up.
Dec 19, 2013 Thread starter #9 M Marcel L Member Joined Nov 20, 2013 Messages 10 Reaction score 0 Location shetrwood park alta yup checked cable its definetly not causing any hangin up work smooth