Primary Clutch

[Summit_800_xrs]

Can anyone tell me how tight the mount bolt is on the primary clutch of a 07 summit 800R?

 

[underdog]

72 ft/lbs I believe

sent from a phone

 

[DTH]

89 ft/lbs.

 

[powerteker]

66 ft/lbs out of the service manual

 

[Poocandoo]

I torque mine to 95 ft/lbs. Re-torque 3 times after 3 seperate run ups. Have done since brand new.

 

[sweld]

Lol so which is it?

 

[sledder325]

this is what i do i first torque it to 85lbs then start and run it with the back end up and on and off the throttle for about a minute then i retorque it to 92lbs

 

[Kiwionsnow]

impact gun........................... on and off.

 

[Poocandoo]

[
Hammer the brake after winding it out. Do 3/4 times. You would be suprised at how much it will spin on the pto. Next time when you pop the cluch off mark the end face of the pto with a felt pen, line up with the arrow on the cluch on re-install. Next time you pop it off see how close the marks line up. UOTE=sledder325;1299699]this is what i do i first torque it to 85lbs then start and run it with the back end up and on and off the throttle for about a minute then i retorque it to 92lbs[/QUOTE]