My Boss Seat needs the seams redone, any recommendations in the Edmonton area

[Uturn]

See pics below for before and after.:d

Looking for a local place to get the seams on my Boss seat redone. Anyone have a recommendation for the Edmonton area.

Also thinking about having the NOS pouch enlarged for more carrying capacity. Only have one bottle(Shhhh, it's under the hood and only used for the muff pot) but I carry lots of survival gear.

Thanks

 

[Summitric]

Best Place Bar None In And Around The Edmonton Area Is: Volker's Upholstery ... Call Volker @ 440-4538 .... Works Out Of His Basement And Address Is 5204 - 92 Avenue, Edmonton..... He Can Do Anything Upholstery Wise. Lots Of Satisfied Snowandmudders On Here That Have Had Him Do Work.... And The Most Economical Prices You Will Find!!! Show Pics Of Before And After!!!

 

[Uturn]

Well Summitric was right, Volker did an excellent job on my seat. He redid every seam on the seat and enlarged the storage. It barely fit the nitrous bottle before, now there is about 50% more room. High recommend his work and the price was amazing.:d

Before:

After:

 

[SLEDBUNNYRACING]

He's a great guy, he refurbished my boat cover and did an awesome job as well.

 

[Summitric]

Best guy around... Did imsicks sled seat too... Did my '06 royal star midnight venture seats as well..... Awesome workmanship and very good prices!

 

[catmando]

Did two seats for me as well,thanks for the reminder,Got another one that needs his magic touch!
catmando!

 

[Summitric]

Did two seats for me as well,thanks for the reminder,Got another one that needs his magic touch!
catmando!

YA, ME TOO.... JUST FOUND SMALL TEAR IN MY 670X MOD SEAT!!!

 

[FossY]

what does he roughly asks for prices ?
like redoing 2 seems and maybe put a decal on ?

 

[Summitric]

what does he roughly asks for prices ?
Like redoing 2 seems and maybe put a decal on ?

redid both my old motorbike seats and seatback and cost about $150.00 total..... Everyone else was almost $500.00!

 

[Uturn]

what does he roughly asks for prices ?
like redoing 2 seems and maybe put a decal on ?

My total bill was $120. I think he charged me $75 for redoing all the seams.

 

[mel.h]

Hey guys, got my stock seat off my 700 Summit rebuilt from base up by John @CY Upholstery in Ft. Sask.He got rid of the sponge that the factory use's & replaced it with closed cell foam & added 4" to the height. He also got rid of the taillight & built a license plate holder in to the access door of the storage compartment. And, the slip & slide seat material has been replaced by a way better leather that will stand the cold better, plus will not allow the water in. Cannot wait for 1st trip to McBride & I just know my knee"s are going to like it too.

 

[deaner]

Hey guys, got my stock seat off my 700 Summit rebuilt from base up by John @CY Upholstery in Ft. Sask.He got rid of the sponge that the factory use's & replaced it with closed cell foam & added 4" to the height. He also got rid of the taillight & built a license plate holder in to the access door of the storage compartment. And, the slip & slide seat material has been replaced by a way better leather that will stand the cold better, plus will not allow the water in. Cannot wait for 1st trip to McBride & I just know my knee"s are going to like it too.

Can you post some pics of this?? I really need to do something with my m1000 seat, but cant seem to swallow the 650 bones for a boss.

 

[Haggis]

Called Volker today - the answering machine said away until the 24th November just in case anyone is in a hurry.

 

[the pigg]

Try Kimbers creations @ 780-915-1847 Kim is verry fussy and does beautiful work. She has repaired every thing for me from a boat tarp to leather jackets sled seats etc.

 

[the pigg]

Try kimbers creations @780-915-1847. kim does beutiful work. She is verry fussy and has done leather jackets, boat seats and sled seats for me.

 

[catmando]

Here is one that I experimented with,The grey is is the same as the orange one before upolstery,Then second pic is the finised seat closer up!
catmando!

 

[Doo Dude]

How much did that cost you. I'm looking to do the same thing with my 04 Rev stock seat. I want to lighten it up, but don't want to buy a Boss seat for the price..

 

[mel.h]

Hey Deaner, will be working on my sled tomorrow, i'll pull it outside in the light & get some good picture's of the seat. Hope to have them posted tomorrow night or the next day.

 

[ZRrrr]

Here is one that I experimented with,The grey is is the same as the orange one before upolstery,Then second pic is the finised seat closer up!
catmando!

I remember when you got that done. How did it ever work out for you? Do you still run it?

 

[mel.h]

Hey Deaner, did not have enough time to get the sled outside for picture's of the seat, hope these one's work for you.Also, the cost was 500.00