mountain bars

b non

Active member
Joined
Sep 18, 2015
Messages
37
Reaction score
11
Location
clyde
how hard would it be to put a monutain bar set up on a fusion 900 as it has the tilt steering on it was thinking like the bars of a dargon or even just a set of motocross bars with a starp and hocks on them any one done this yet. its great the way it is for trails but want to toss it around a bit more in the deeper stuff thanks
 

powder junkie

Active VIP Member
Joined
Nov 18, 2008
Messages
787
Reaction score
527
Location
redwater, alberta, canada
I had an 06 900 rmk. I broke the bars and put a new set of pro tapers from an 09 dragon. The bars fit fine, but were a touch narrower so i had to slid the bar controls inward as far as i could so i could get full grip on and be comfortable. Those sleds have bulky controls compared to dragons. Aslong as the outside diameter of the bars are the same then everythn will clamp on. Careful on heightness too as u may only have 2" of length to play with, without extending cables. And my factory 900 hooks dont fit pro taper bars. Pro taper has smaller hole so i had to use pro taper hooks.
 
Last edited:

b non

Active member
Joined
Sep 18, 2015
Messages
37
Reaction score
11
Location
clyde
might just put a mint strap on stock bars and and set of 90 degree hocks and see how if handles..... if we ever get enough snow
 
Top Bottom