Milwaukee tools

mclean

Active VIP Member
Joined
Nov 28, 2010
Messages
1,932
Reaction score
4,987
Location
Alberta Beach
This blower
1000004533.jpg
 

MP Kid

Active VIP Member
Joined
Dec 20, 2010
Messages
3,010
Reaction score
4,228
Location
East of Calgary
Where/who is the best place to get Milwaukee tools repaired around Calgary?

Electric grease gun only works on low speed
 

thump

Active VIP Member
Joined
Nov 2, 2007
Messages
327
Reaction score
335
Location
Earth
Anyone have feedback on this wet/dry vacuum? Looking for something universal to take along in the 5th wheel camper.
Screen Shot 2024-04-29 at 8.29.18 PM.png
 

MK4TDI

Active VIP Member
Joined
Dec 5, 2010
Messages
4,000
Reaction score
16,645
Location
Saskatchatoon
Anyone have feedback on this wet/dry vacuum? Looking for something universal to take along in the 5th wheel camper.View attachment 282726
I have a few of the non pack out shop vacs and they are awesome, definitely a little noisy out the exhaust side bit very very good suction. Filters are cheap and can be shaken out and cleaned with compressed air too.
 

towerrigger

Active VIP Member
Joined
Nov 15, 2009
Messages
430
Reaction score
708
Location
Sask
I have this wet/dry Vac at home and the older non packout at work. The bigger one is better. Dual speed switch, batteries last longer. Awesome unit.
 

rknight111

Administrator
Administrator
Moderator
Joined
Sep 27, 2006
Messages
13,654
Reaction score
23,292
Location
Parkland County, AB and Valemount, BC
Website
www.snowandmud.com
We have 4 of these for work, they work excellent. Wont pass the DOP for certified HEPA filtration and has no bag but there awesome vacuums. Most HEPA vacuums fail unless your spending $600 or more.
The DOP test (Dispersed Oil Particulate) has been designed to ensure the integrity and efficiency of HEPA filters in terms of airborne particles containment based on their holding capacity of dispersed oil particulate of 0,3 µm. This type of test is a requirement because it pinpoints any leaks on the HEPA filter, that is, through its accordion-shaped material, its frame or its seals. Note that if particles go around the HEPA filter, the DOP test has failed.
 

MK4TDI

Active VIP Member
Joined
Dec 5, 2010
Messages
4,000
Reaction score
16,645
Location
Saskatchatoon
Thanks for all the reviews guys, looks like its going on my shopping list next time I get to Edmonton.
I was quoted 249.99 Plus tax today for that unit just to give you an idea what the price should be
 

smokinD

Active VIP Member
Joined
Jun 1, 2011
Messages
4,251
Reaction score
18,918
Location
Freedom, Ab

turbo392

Active VIP Member
Joined
Sep 27, 2013
Messages
571
Reaction score
1,159
Location
Cochrane, Alberta
Nobody will beat the price at Home Depot if they stock it. Any Milwaukee sale or deal or promotion at a supplier is because Home Depot dropped their price first.
 

MK4TDI

Active VIP Member
Joined
Dec 5, 2010
Messages
4,000
Reaction score
16,645
Location
Saskatchatoon
Nobody will beat the price at Home Depot if they stock it. Any Milwaukee sale or deal or promotion at a supplier is because Home Depot dropped their price first.
I routinely get better pricing than home depots advertised price... they are typically better than bolt supply, construction fasteners and fastenal though.
 
Top Bottom