MCXpress wire pins

GSR

Active VIP Member
Joined
Nov 16, 2008
Messages
226
Reaction score
803
Location
Golden
Anyone out there have a Lordco / Napa part number for the wire connector pins??
Keep an eye on the condition of these pins over time as they do break down.
We've seen lots of broken pins this season...
 

TABSTER

Active VIP Member
Joined
Apr 2, 2007
Messages
1,847
Reaction score
273
Location
Saskatoon SK
I dont have a part number but most electronic places have them as they are a common style pin in the electronics industry. not a weather proof, liquid tight connection or hardy for that matter. Recommend once installed silicone the poop out of the terminals and connector to the mcx box. Helps omit vibration fatigue/failure of the pins.
 

Lowlife82

Active VIP Member
Joined
Jan 22, 2012
Messages
5,643
Reaction score
5,570
Location
.
Watch which type of silicone ya use. Electrical does not like some types. If doing this I'd recommend dialectic grease on connection and then silicone outside it vibes r a issue.
 

Tuesday

Active VIP Member
Joined
Nov 16, 2008
Messages
264
Reaction score
199
Location
Lacombe
Pretty sure I picked up my connectors at Kohen electronics in Red Deer. Was a few years back so i dont remember the part number.
 
Top Bottom