m1 clutching

[chriscat1000]

i'm woundering if anybody knows were the rpms should be on a 09 m1 for peak hp i'm pulling 7200 rpm i was told i should be at 8800 rpm what clutch are you using and rpm your at

 

[0neoldfart]

i'm woundering if anybody knows were the rpms should be on a 09 m1 for peak hp i'm pulling 7200 rpm i was told i should be at 8800 rpm what clutch are you using and rpm your at

8800 RPM is way too fast for a 1000 - even if it is modded. A stocker should be around 7200, SLP piped unit around 7600-7700. My setup with SLP setup, RKT head & secondary, STM valves and BDX box runs @ 7700 RPM at 7500 to 8500', using cutler 80g weights with 1g added to each flyweight.

 

[snowseeker]

With piping it with the speedworks I believe your suppose to be 7600 - 7800 at the max. Stock you should be around the 7400 on the m1000.

 

[recguy]

My M1 is running around 7700 with the SLP set up and dalton clutching. Stock is around 7400.