Hy!how do i make my drive belt tide?

[pispimotto]

i jus got an 2008 ski-doo summit x and i dont have the maximum power,same one told me that is because the belt is loose....but i dont know how to fix that.please can you help me?

 

[Puba]

If thats the case you'll need to replace it with a new one.

 

[blastoff]

have u checked it for being loose????

 

[Wingwalker]

i jus got an 2008 ski-doo summit x and i dont have the maximum power,same one told me that is because the belt is loose....but i dont know how to fix that.please can you help me?

could also be that its not got the right clutch weights for the altitude your riding at

 

[smokindave]

Sounds like he is looking for lessons on setting belt deflection on a Doo.I am a Cat guy and have no idea,but am sure someone on S&M can help him.

 

[mxz sledhead]

Check your owner manual but I believe it 3/4 defection you can adjust your
driven pulley by adjusting the allen set screws to close pulley tighter then
tighten the jam nuts the top of belt should ride just above the top of pulley but
if your belt wore to much and belt is to narrow this wouldn't help

 

[pispimotto]

could also be that its not got the right clutch weights for the altitude your riding at

i ride at about 1500-2000meters.what do i need to chenge?thanks

 

[maxwell]

i ride at about 1500-2000meters.what do i need to chenge?thanks

nothing its a summit its designed for that altitude. not sure what weights he is refering too. shouldnt need to adjust the pin weight.

just the clickers. but you know what those are im sure