HP Powertek 800 HO ???

[Pappillion]

Anyone know the stock HP and Torque on a 2006 Summit 800 HO?

Also, anyone Dyno'd the same motor with a port and polish done to it?

Thanks

 

[rwjk0]

Dyno Tech Research info.

First up was John Misencik’s (sorry about spelling) SkiDoo 800HO. This engine had
been trail ported by semi-retired Cicero tuner Mike Gray, head cut a moderate .010”.
With the stock pipe and base jetting that equaled .70 lb/hphr the engine made a
respectable 103.4 lb/ft and 151.8 CHP. After tweaking fuel flow to .60 and installing a
Dynoport single pipe with the stock muffler this engine made 106 lb/ft and 160.1 CHP
for 13 seconds on pump gas. Grins abounded.

 

[rwjk0]

Dyno Tech Research shows a stock 2006 800 HO @

7400 RPM - 137.9 HP 97.9 lb/ft

7600 RPM - 139.8 HP 96.6 lb/ft