cmpression problem?

jerry1230

New member
Joined
Feb 6, 2009
Messages
3
Reaction score
0
Location
torrington ct.
I have a prblem starting my 600 XLT triple when it is cold. Ithas 85 lbs of compression. Could this be the problem. any info would be helpfull Thanx Jerry
 

mxz sledhead

Active VIP Member
Joined
Jan 26, 2009
Messages
962
Reaction score
113
Location
Stony Plain
Forged alum piston knowen to do that if that is what you have cause the
heat of conbustion expand piston do atest when motor operate temp
compare the findings justa.thought . mxzsledhead
 

mountainbigbull

Active VIP Member
Joined
Nov 25, 2006
Messages
335
Reaction score
135
Location
Cochrane Alberta
I checked my XLT a while ago. It was in a warm garage I had about 120 psi (if I remember right) it was even on all cylinders. 85 is low but normally hard starting due to low compression is more when it is hot but 85 is low and would cause hard starting I would think. Is it 85 on all cylinders? How many miles on this engine? Cold vs. warm should be very little change I wouldn't expect no more the 5 psi. I got slightly less when it was warmed up. Is the 85 checked at cold or hot?
 
Top Bottom