Clutch Alignment Specs for the XM

[pigfarmer]

Good morning,
Does anybody have the specs from the Shop Manual on the dimensions (x,y,z) for the clutch alignment for the 2013 Summit? Would they be the same as the 2008/9? Specs from a 2012 shop manual? What about the specs from the 'QRS Revman' kit? Was going to do a QC check on my clutch alignment today.

2008/9 BRP Specs I have.

Z = 21MM
X = 37.10 +/- .5MM
Y-X = 1.62 +/- 1.0MM

Thanks

 

[pigfarmer]

My measurements: (These are off of a 2013 146" SP XM)
X = 38.9mm
Y = 39.7mm
Y-X = 0.8mm
Z= 20.5mm

The clutches are only warm (can hold my hand on them) after an hour of fairly aggressive ditch banging. So it appears that the 08/09 specs are a little different than the 2013. (The 'X' dimension is a little larger)

Update: Found 'Bill's QRS Shim Kit'

http://www.snowestonline.com/forum/attachment.php?attachmentid=166654&d=1328802028

According to this article a 'X' of 39-40mm is desirable for the newer summits. 38.9mm is close enough for me, since the clutches seem to be functioning properly and are not hot.