Brake and throttle cables

colton_lasko

Active member
Joined
May 4, 2010
Messages
37
Reaction score
18
Location
saskatchewan canada
Does any one know how much extra cable and wire there is on a 2013 snow pro.. Wanna put a different set of bars on but want them a bit taller

Thanks
 

Motomonks

Active member
Joined
Nov 21, 2011
Messages
34
Reaction score
0
Location
Red Deer, Alberta
On my 14 with the telescope all the way up there is still a few inches left for electrical and throttle, however the brake line looks like it might hold you back a little, I'm sure you could remove a couple zip ties and gain some length though
 

cookgio

Active VIP Member
Joined
Aug 21, 2009
Messages
274
Reaction score
71
Location
cold lake, alberta
You can put a 3 riser just have to cut a few zap straps and pull excess up.

Sent from my SGH-I747M using Tapatalk
 

colton_lasko

Active member
Joined
May 4, 2010
Messages
37
Reaction score
18
Location
saskatchewan canada
Ok so if you use after market bars that make the heater switches further apart from the throttle then you no longer have enough wire length and your screwed like I am now
 

cookgio

Active VIP Member
Joined
Aug 21, 2009
Messages
274
Reaction score
71
Location
cold lake, alberta
Alot of guys who change bars relocate that to the riser.with zap straps.

Sent from my SGH-I747M using Tapatalk
 
Top Bottom