Boost It Turbo Fuel Programmer (2010 M8)

schwindt

Active member
Joined
Nov 14, 2011
Messages
84
Reaction score
107
Location
Fruitvale, BC & Sask
Just wanted to post on how wonderful this kit works, I have a 2010 M8 with CPC stage 2 turbo kit running stock head 8 psi about 70/30 mix pump gas/Race Fuel. Last year to run the same PSI I had to fatten the bottom end up so much that I had a massive bog when going downhill, and in basically all other condition's other than wide open throttle pulls. I wasn't able to hold down throttle for more than 4-5 seconds before it was starting to lean out. Tried everything to get this working last year.

I ordered a kit from Neil, with the boost it box, and a single injector to be installed in the charge tube. Was able to get the injector bung welded for 35 bucks, install was simple. Tuning is amazing, just one main setting for the extra injector, then you can add or remove fuel fuel per rpm in increments of from 3000 to 8500 rpm for some additional fuel. After maybe a morning of tuning I had a solid 12 AF ratio zero bog down low, was able to lay down long pulls say 15 second plus full throttle, and now have very minimal downhill loadup on fuel, cleans out almost immediately (I am sure with some further tuning I can get this out). So if anyone was on the fence about the system they flat out work, best thing i have spend money on in a while. Would highly recommend these for anyone out there having issues with DOBEX.

Lastly I called Neil think it was a Sunday to ask a few more questions, picked up and was more than happy to assist me with my questions. Top Shelf keep up goo work guys!

Chris
 

schwindt

Active member
Joined
Nov 14, 2011
Messages
84
Reaction score
107
Location
Fruitvale, BC & Sask
thought ya had to shim or run an 09 head cause the 10 is a high compression head ... correct me if im wrong !!!

I heard that as well, was about to get a new head this year figuring it was the problem, tried this route instead....You are running the machine more on the edge of detonation with the 10 head, however I pulled the head apart checked pistons after last year and they were in fantastic shape. Not saying this will work for everyone as there is way to may variables but for me riding 6000 to 8000 ft works perfect
 

BIGTurboT

Member
Joined
Mar 19, 2012
Messages
16
Reaction score
0
Location
Rivercourse, Ab
schwindt

I have the same machine with the same kit except with the '09 head. Solid running sled although I have experienced a similar issue with a low end bog, smokin' black like a begger when ya take off, messin' with the throttle when ya start out to keep it from sputtering. This will be my 3rd season on this kit. I have been happy with how I have it tuned except for on the bottom end! I have it tuned a bit rich right across the board and I don't wanna back any of my settings down because the way it's set now has been very reliable (although frustrating if ya gotta punch it) but i've made it work... I know this bog is fixable, but after 3 seasons the attitude box just ain't doin' what I want it to! looking for something a little more user friendly! Just curious as to what what the boost-it kit with extra injector roughly cost ya and if you had any pictures of your install?

Thanks
 

schwindt

Active member
Joined
Nov 14, 2011
Messages
84
Reaction score
107
Location
Fruitvale, BC & Sask
schwindt

I have the same machine with the same kit except with the '09 head. Solid running sled although I have experienced a similar issue with a low end bog, smokin' black like a begger when ya take off, messin' with the throttle when ya start out to keep it from sputtering. This will be my 3rd season on this kit. I have been happy with how I have it tuned except for on the bottom end! I have it tuned a bit rich right across the board and I don't wanna back any of my settings down because the way it's set now has been very reliable (although frustrating if ya gotta punch it) but i've made it work... I know this bog is fixable, but after 3 seasons the attitude box just ain't doin' what I want it to! looking for something a little more user friendly! Just curious as to what what the boost-it kit with extra injector roughly cost ya and if you had any pictures of your install?

Thanks

Think it was around $1000 all in, how do you post pictures on here?
 

schwindt

Active member
Joined
Nov 14, 2011
Messages
84
Reaction score
107
Location
Fruitvale, BC & Sask
IMG_0396.jpg
 
Top Bottom