Boondocker controller on Apex help?

[MRFUSION]

I will be starting my engine soon on my Nypex project and am wondering if anyone has a jumping off point for settings on this box. Any help would be appreciated. Thanx Shad

 

[TABSTER]

These are a start for a 2860 turbo


RPM Range Low Mid High
3000​

​

​

​

‐1 ‐3 0
6000 0 ‐5 0
8500 0 ‐5 0
10500 0 0 0
TBOL ‐4 0 4 8
0 0 20 40
TBOH 12 16 20 24
60 80 100 120
ACEL AM DR Sens​

1 3 8

 

[MRFUSION]

Hey thanks for the help. I am running a 2860 turbo so this will be a good starting point. Thanks again. Shad

 

[TABSTER]

let me know when your ready to set up the box and i will go through it with you.

 

[400hp]

do yourself big favor and get pure logic or the new stand-alone fuel system.........boondockers controll box is garbage and needs to be played with every ride

 

[TABSTER]

do yourself big favor and get pure logic or the new stand-alone fuel system.........boondockers controll box is garbage and needs to be played with every ride

I disagree..... That the BD Boxes are garbage. I install BD kits and ride them... Like all boxes you have to do the initial set up, but then they are set. Unless you change something with the sled or fuel...etc.
But then again thats J.M.O., much like yours on them being garbage, its a opinion.

 

[MRFUSION]

I am finishing a custom Nypex project and I am sure my setting will be a little different than others but I do like the storing of a maps and going between them. I have installed other systems and messed with the RB3. I refuse to be the guy downloading maps from my laptop every morning. This system seems good once I learn it. Thank you for your help Tabster and I will take you up once I fire this beast up. Shad