amsoil dominator

snowthing

Active member
Joined
Mar 7, 2011
Messages
63
Reaction score
58
Location
Lamont county
been searching the site and i have seen a couple posts against using amsoil dominator. just curious as why people are saying this and why you shouldn't run it?
 

d mills

Active VIP Member
Joined
Nov 10, 2009
Messages
3,275
Reaction score
4,982
Location
camrose
been searching the site and i have seen a couple posts against using amsoil dominator. just curious as why people are saying this and why you shouldn't run it?

Dominator is for premix only. Not to be used with oil injection.

Sent from my BlackBerry 9300 using Tapatalk
 

Tiny pro-x

Active member
Joined
Nov 13, 2010
Messages
35
Reaction score
10
Location
Grande Prairie AB
Dominator is for pre mix or oil injetion i have run it in my Pro-x for 7 years never had an issue runs strong and motor has 6000 miles on it and power valves are easy to clean
 

d mills

Active VIP Member
Joined
Nov 10, 2009
Messages
3,275
Reaction score
4,982
Location
camrose
Dominator is for pre mix or oil injetion i have run it in my Pro-x for 7 years never had an issue runs strong and motor has 6000 miles on it and power valves are easy to clean

I won't bet any cash on it but I believe it says premix only right on the jug.

Sent from my BlackBerry 9300 using Tapatalk
 

Iron Horse Racing

Active VIP Member
Joined
Dec 23, 2008
Messages
1,499
Reaction score
1,514
Location
Sherwood Park, ALberta
I'll take that bet......
 

Attachments

  • Amsoil.JPG
    Amsoil.JPG
    121.9 KB · Views: 169

snowthing

Active member
Joined
Mar 7, 2011
Messages
63
Reaction score
58
Location
Lamont county
i was just curious because buddy is running it in his 880 doo with no problems in two years on that oil.
 

Darrell262

Active member
Joined
Dec 2, 2011
Messages
38
Reaction score
18
Location
Prince George
Website
www.calculatedrisk.ca
I run interceptor on my m1000 and not dominator. I can't remember where I heard this, probley a friend but I do believe that dominator does not have a rust inhibitor in the oil so stuff can rust(bearings stuff that is steel)? where as interceptor does.

I did some research into this for you(and me)
http://www.amsoil.com/shop/by-product/motor-oil/2-stroke/interceptor-2-cycle-oil/

  • Provides exceptional SAE #4 cold-temperature fluidity (-60°F pour point)
  • Protects against rust

http://www.amsoil.com/shop/by-product/motor-oil/2-stroke/dominator-2-cycle-oil/

This seems like a more race only type oil
Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.

That there looks to me like it would not be a rust
inhibitor
I dont like the short term use deal.

So you do the figuring, I'll stick with interceptor.

 
Last edited:
Top Bottom