700 jugs on a 600ho motor

[Zx 600]

Is it posible to bolt on 700 jugs too a 600ho bottom end


Sent from my iPhone using

 

[tex78]

Yes it is. The 600ho is the same bottom end as the older 700.

U need the 01 and up jugs with the bigger bolts ( size of holes ) and if I recall a 670 ho piston... U have to either cut Ur 600ho head to match or a 700 head.

Did it to my 04 600ho. Pulled better than a 800ho ( even a modded one )

Real snappy power too.

Think it was 138 ish hp and 112 ftlb.

Call al at the sled shed in Revy. He has done lots.

sent while I should be drinking twisted teas

 

[Zx 600]

What about a 670 piston


Sent from my iPhone using

 

[tex78]

What about a 670 piston


Sent from my iPhone using

Huh ??

For some reason I recall u have to use a 670 Ho piston in the 700 jugs , cause the pin boss is the same as the 600 Ho , where the 700 is different.

Do a google search and should bring u to dootalk.

Or call sled head racing from the states. Big john has done lots.

sent while I should be drinking twisted teas