28" Zillas or 27" Mudlite XTR on Ranger 900

[wilwap]

Just wondering if anyone is running 28" Zillas on a stock Ranger 900?? If so any rubbing issues. The Zillas are 10" for the front. Also looking at 27" mudlite XTR feedback good or bad?

Thanks

 

[tiger666]

I have 28"zillas on my 570 rzr,a 2"lift kit was needed.My front end is the same as the 800 not sure if its the same as the 900

 

[rzrgade]

Zillas are a little light for a 900 ranger... But if you
must you will need bead locks....

 

[wilwap]

Good to know about the bead locks.....i wasn't planning on upgrading the wheels or lifting so maybe I will go with the XTR's

 

[old mountain man]

The Mega Mayhem's are a lot stronger than the Zilla's. I have them on my 900 and they work well.

 

[wilwap]

The Mega Mayhem's are a lot stronger than the Zilla's. I have them on my 900 and they work well.

What size are you running??

 

[old mountain man]

28" with a 2" lift. They may have fit without the lift but a bit more clearance is good. 2" is not enough to cause any extra wear.

 

[LennyR]

I had the 28 inch zillas on a new Teryx , didn't like em , took me off and put on mudlite xtr's , like them way way better . Gonna buy bead lock rims tho ,no problems yet but a bit worried about sidewall issues.

 

[TylerG]

I had the 28 inch zillas on a new Teryx , didn't like em , took me off and put on mudlite xtr's , like them way way better . Gonna buy bead lock rims tho ,no problems yet but a bit worried about sidewall issues.

the XTR definitely has a beefier sidewall than the regular mudlites or the zilla's. But on a SxS Beadlocks are definitely a good idea, may help!

 

[wilwap]

Well I went with the XTR's and so far I like them. They are pretty smooth on the pavement too. My bro has the XTR's in a 14" and I got the 12" and his are about 3/4" taller?? I didn't think the wheel size would make a difference in the height.