2013 xm clutch or brake problems?

Poocandoo

Member
Joined
Nov 13, 2011
Messages
24
Reaction score
24
Location
Kelowna
that is the bushing from your govenor cup. stop at Banner rec in Vernon on Friday (open) About $50 for a new cup with bushing. The plastic bushing is to help hold the spring in line during shift out. ps. when was the last time you pulled your clutch apart?
 

driller

Active member
Joined
Mar 31, 2007
Messages
138
Reaction score
103
Location
BC
seen the same problem in Kamloops the guy had 4700 klm on his clutch and bearing let go in the governor cup as well
 

Poocandoo

Member
Joined
Nov 13, 2011
Messages
24
Reaction score
24
Location
Kelowna
Better check the the sliding sheave bushing also. I think I made a mistake and directed you to the wrong bushing. The govenor bushing is about 1.1/4 inch high and the sheave bushing is about 3/4 inch high.To change the sheave bushing you need a special removal/ install tool.
 
Top Bottom