2013 xm clutch or brake problems?

[Poocandoo]

that is the bushing from your govenor cup. stop at Banner rec in Vernon on Friday (open) About $50 for a new cup with bushing. The plastic bushing is to help hold the spring in line during shift out. ps. when was the last time you pulled your clutch apart?

 

[driller]

seen the same problem in Kamloops the guy had 4700 klm on his clutch and bearing let go in the governor cup as well

 

[Poocandoo]

Better check the the sliding sheave bushing also. I think I made a mistake and directed you to the wrong bushing. The govenor bushing is about 1.1/4 inch high and the sheave bushing is about 3/4 inch high.To change the sheave bushing you need a special removal/ install tool.

 

[danmilton87]

This sled had 1500km on it is that a warrenty part

 

[Poocandoo]

should be

 

[danmilton87]

Thanks for the help everyone bought a new spring cap thing and its running great