2008 arctic cat m8 bog issue

tcase82

Member
Joined
Nov 15, 2012
Messages
18
Reaction score
0
Location
Prince George
I have a 2008 arctic cat m8 and it has a bog to it if you get on the throttle hard, but idles fine. I have changed the reeds to m1000 ones and boyesen and the issue was still there. I also have checked the power valves, cleaned the slight charcoal off of them and checked to make sure they release good. I did the fuel regulator tonight and it didn't make a difference with the bog. The spark plugs are good and the clutch springs are good. I also have checked the injectors. I'm wondering if anyone else can think of what I am missing or what else I should be looking for?
 

tcase82

Member
Joined
Nov 15, 2012
Messages
18
Reaction score
0
Location
Prince George
The problem finally showed up. The steel casing running over the cable for the power valves broke off right at the tube going into the engine. Making the clutch side power valve hang up a bit and finally threw a code.
 
Top Bottom