ntsims
New member
Hey everyone,
New to the site but I read a lot of post to diagnose problems I have had in the past. The advise is great and have appreciated it. Now for the new problem I can figure out:
I pull the sled out of the enclosed and let it warm up while i get ready. 10min prob. The sled runs like a scalded dog for two or three hours. Once I find some nice cornices and some good jumps, the sled will run great for another hour or so of playing. Then all of a sudden I will climb a hill and top out only to have the sled bog down and run like crap.
After stopping and letting the pipe cool off enough to change one of the plugs on the clutch side, the sled runs great again. Looks like the engine is fouling plugs on the one side. Just wondering why it would be doing this after running a while. Any help would be great.
Sled is all stock except a MBRP can, side vents, and a two wheel kit.
Thanks for any help guys!
New to the site but I read a lot of post to diagnose problems I have had in the past. The advise is great and have appreciated it. Now for the new problem I can figure out:
I pull the sled out of the enclosed and let it warm up while i get ready. 10min prob. The sled runs like a scalded dog for two or three hours. Once I find some nice cornices and some good jumps, the sled will run great for another hour or so of playing. Then all of a sudden I will climb a hill and top out only to have the sled bog down and run like crap.
After stopping and letting the pipe cool off enough to change one of the plugs on the clutch side, the sled runs great again. Looks like the engine is fouling plugs on the one side. Just wondering why it would be doing this after running a while. Any help would be great.
Sled is all stock except a MBRP can, side vents, and a two wheel kit.
Thanks for any help guys!