just looking for some clutching info on an 09 xp 163,completely stock but want to run on clicker 1 or 2 at 2000 ft and would like to be on 4 or 5 at 6-7000 ft.just wondering what guys are using for springs and clutch pinweight.
09 xp 163 clutching
- Thread starter hardcorex
- Start date
- Thread starter
- #2
bhowes
Active VIP Member
dj kit best thing you can dooo for your 09
Summwat
Member
What's your reasoning for wanting to run clicker 1 or 2 at 2000 ft or 5 or 6...... Your engine rpm should determine what clicker you run. Your engine is designed to make peak hp between 8100 and 8300 rpm so u would adjust your clickers accordingly.
Summit69
Active member
Its impossible to tell you what pin weight youll need because every rider/sled is different. If you want to run on a specific clicker, put your sled on that clicker and adjust you weight from there. I know with the pins and weights that DJ supplies with their kits, its 1 gram = approx 100rpm (maybe its 200rpm I cant recall exactly). If rpms are low, then reduce flyweight. If rpms are high, then increase flyweight.
Snowmobile Clutch Kits, Dynamo Joe, mxzx revzone Here is DJ's website for more info.
Snowmobile Clutch Kits, Dynamo Joe, mxzx revzone Here is DJ's website for more info.
Similar threads
