04 800 carb help? and head torque specs

[kygreen]

hello every one,
i have a 2004 mxz x 8oo blair morgan, just did my top end and cleaned carbs and everything, wile i wait for the pistons to come in, what is the base setting for the adjustment knob on the carb, i forgot to count the turns when i took it off,,,, i tried my best to find this info already posted but couldent:s and also i need to know what to torque my jugs and head to, thanks for the help

 

[slededjr]

Adjuster knob 1.5 turns out. 28 ft. lbs cylinder bolts. 21 ft. lbs head. Start in the middle of head and work your way out doing a criss cross formation. Also, just loosely fasten the y pipe on cylinders before you torque them down to make sure it woll align when done.

 

[tex78]

Huh ??

Just snug the cylinder bolts up some.
Then tighten the y pipe bolts to spec
The tighten the cylinder bolts to spec


If you do the cylinders first before the y pipe u can distort the y pipe from the cylinders not being flat aligned.



sent from my htc

 

[kygreen]

Thanks guys going to help a lot And saved me the service manual