I followed the advice on this site to go to CanadianGunNutz site for some help (thanks sirkdev). It was great info on my issue and it gave me an article on how to adjust my factory trigger pull and over-travel. I have he trigger set at about 4.5 lbs. I like the idea that trigger pull should be...
Several years ago my dad converted a old time ice box type fridge ( ice block on the bottom with a separate smaller door on the bottom ) and just added a single burner hot plate. The chrome grates and steel porcelin or enamel ( I think ) internal walls worked well. You could open the door and...
I have a Savage 110 7MM Rem Mag that does not have an AccuTrigger. When My friends and I were doing some shooting - They mentioned that the trigger is a bit tough ( lots of pull weight ) and I agree. It feels like squeezing a hand operated construction stapler ( maybe I m getting weak) . I am...
I asked an Auto body shop to paint my bumpers when my truck was going into the paint booth for hail repair - they wanted another $1800. Replacement chrome bumpers were about $800. One guy suggest that I do it myself and prep sand and paint the bumpers myself and apply PlasticDip clear . I am...
Looking for a good map for WMU 351 . I don't mind PDF's Any suggestions I can find a good map to navigate the area with ? I am open to suggestions of a recent map ( satilite , oil lease road etc. )
Cheers
Zar
Thanks for the feed back. The pan gasket surface was distorted as well due to the crap gasket and appling the correct torque. In hind sight the torque from the book is for the factory gasket and not the nitrile rubber gasket. I did have to flip over the pan and pound out the bolt holes until...
I just wanted to share a problem that could be avoided. I had my transmission serviced ( along wioth some other mechanical work ) at a local shop near work and found out they sub out the tranny flush to a Jiffy Lube acrosss the parking lot. I was not concerned at that point since I realize that...
Has anyone sucessfully challenged a draw result ( not been drawen ) ? I thought for sure I would get my Bull Moose draw ( late season ) in WMU 346 on a priority 3. The draw priority must have changed with SR ( it was a sure thing for years ).
Sadly
Zar
I changed mine to a Hawse fairlead. I have used the syn rope from Warn for 2 years and I have had line failures due to fraying ( from my plow use ). I change out the winch line every season to a warn red plow line and back again in the sping. It is easy t to fix a Syn rope when it does break...
I also have a set of Open Country Toyo for 45000 Km lots of wear still left - should be good for about 80000 Km (I estimate) . Very good cold weather- ice tire for a 10 ply E load tire. Open Country tires do not have large lugs for off roading but work very well on all weather roads.
Good luck
No splines on the spindle ( welded solid to the arm on top[ ). Check if the a arms are bent - If the A arms are good ( not bent ) then it might be cheaper to grind or torch off the arm off the spindle and re weld ( re paint )
Yes i agree . After a only 30 rounds my scope that came with the gun had very loose ring screws. I didn't notice that the scope had moved but it would have been a problem eventually.
A good option is a redfield the were recently purchased by leupold and I've heard nothing by great reviews about them. However you can never go wrong with bushnell their warranty is excellent. I recommend a small shop in Edmonton called P and D enterprise they take their time and install the...
I have done this twice. In both cases the binoculars fogged up on the inside ( seal failure ). I sent the gear to Bushnell and they repalced the entire binocular. The binoculars were at least 5 years old in both cases
Well I did it -I bought a Zeiss Conquest 3X9 40 MC from Bass Pro. I compared the Bushnell Elite , Leupold VX l, Leupold Rifleman. The actual Leupold I wanted to compare was the VX ll but they had no stock left. Zeiss was the most expensive but it was the easiest for finding the target in the eye...
I bought a Savage 7 mm Mag & scope combo package last year and I love the gun . I am not so sure about the cheap Bushnell scope. i have had cheap scopes in the past and I wonder at what point is it worth extra $$ to pay for a quality scope. Scope range from $100 to $ 3000. I bought a Bushnell...
I had a similar problem with my Ford SD. It was fixed by replacing the mount bushings in my stering stabilizer. I found the best advice from Tire Warehouse on 99 st in south Ed