CNC MDF Plywood anyone?

overkill19

Active VIP Member
Joined
Mar 9, 2014
Messages
305
Reaction score
694
Anyone know who would cnc a couple sheets of 1" mdf ? I have a cad file.
 

overkill19

Active VIP Member
Joined
Mar 9, 2014
Messages
305
Reaction score
694
Fyi Router tech in red deer is the only place i could find to do this.
 

overkill19

Active VIP Member
Joined
Mar 9, 2014
Messages
305
Reaction score
694
Fyi Router tech in red deer is the only place i could find to do this.

WellI was wrong...Router tech kept promising me they would have it done... next week! Weeks turned into months. So i decided to build my own jig.
A trip to my ever reliable Lazermann.
Built a jig ....and while i was there we made a welding table top too ! I made the welding table hole to match the wood top so the PARF dogs fit both tops.
a4cecbcf73f8b2c10879a59490c536fa.jpg
20298f307ca1e7df3744a055da178803.jpg
2bce520748491389373c1f05306bb999.jpg
495b14a94a6af75f71ae0c5a5ba66cbd.jpg
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
The aluminium jig has 27mm holes. So that my festool router bushing fits in perfectly. Riging up a 20mm router bit that make the Parf dogs fit tight... well that was a journey!
 

overkill19

Active VIP Member
Joined
Mar 9, 2014
Messages
305
Reaction score
694
The aluminium jig has 27mm holes. So that my festool router bushing fits in perfectly. Riging up a 20mm router bit that make the Parf dogs fit tight... well that was a journey!

I see tapatalk logged me in wrong again
 
Top Bottom