Rev Clutching

leithoff

New member
Joined
Mar 26, 2007
Messages
3
Reaction score
0
Location
Edmonton
I just bought an '05 Rev and had up in McBride on the weekend. My RPM was maxing out at 6900 and was not getting much track speed. I have my primary set on 1 and I am wondering if anybody knows how much I should bump it up to.
 

Summiteer

Active VIP Member
Joined
Nov 8, 2006
Messages
5,883
Reaction score
3,508
Location
Whitecourt, Ab
For every # you go up on the primary, your max RPM increases by about 200
At Renshaw I've usually had mine (06 800) set on 4. Its a bit different for every sled. My buddy with an 04 800X usually has his set on 3. Just mess around with it until you hit 7850 or so at full throttle.
 

Slamnek

Active VIP Member
Joined
Nov 14, 2006
Messages
2,826
Reaction score
1,570
Location
Kitscoty
I have my 05 rev 800 set on 1 or 2 down low but in the renshaw i put it on 4. worked awsome, next time i would like to try 5.
 

eric mcqueen15

New member
Joined
Mar 28, 2007
Messages
4
Reaction score
2
Location
Calgary alberta
2004 rev 800

i have a 2004 rev 800 and it has a bit of trouble climbing the steep and deep hills i have the rpms set at about 7900 RPM and there is know clutch work done to it i was just wondering what the best clutching would be for my problem. i was also wondering if anyone had and problems with a leaking oil cap.
 

Billy Boy

Active VIP Member
Joined
Nov 14, 2006
Messages
689
Reaction score
332
Location
Central Alberta
Clutching

:cool: Was riding with some guys at Quartz a couple of weeks ago with 07 revs and there cluthing was set at 3. We rode Silent the next day and the clutching seemed to work fine.

Happy Sledeen!!
 
Top Bottom