Kill switch

[grampoll]

I was trying to change my kill switch and inadvertently pulled all the pins out of the six pin connector. Can anyone tell me which pins go where? It's the on with the throttle, kill switch and heated grips going to it. Thanks

 

[oler1234]

If you pulled just the two pins, then just slam them back in the connector. Doesn't matter where they go as it is a two wire kill switch. It's just a grounding switch so reversing the wires will not make a diffrence at all.

If if you pulled more than two wires... Well then it does matter where wires go

 

[grampoll]

Yup, I pulled them all. I broke the connector trying to get them out. So I pulled them all out as I was going to get a new one and I forgot to mark what goes where. I'm not by the sled right now but do the colors of the wires match on the other connector that'll make it easy


Sent from my iPhone using Tapatalk

 

[Turts]

 

[RGM]

You need one of these to remove the terminals. If you just yank them out you have broken the the connector

 

[grampoll]

Perfect, thanks guys


Sent from my iPhone using Tapatalk