Attention m8 owners or mechanics

[CatMan16]

I have a question about the vacuum line or hose that comes out of the Ecu on my 08 M8. I have my airbox out to change my bent a arms and noticed the hose from the Ecu was pinched in the airbox to throttle body duct. Is this normal if not where should it go? Also do I need to remove my belly pan protector to get to the lower a arm bolts at the back?Thanks in advance.

 

[krr]

Yes you will need to remove the belly pan and the front bumper, in order to remove the bolts from the arms, the tube should be free and should not be pinched, I would move the tube to any spot that it is free from being pinched or pluged.

 

[CatMan16]

Thanks I am working on it now and have all the bottom panels off.